Skip to content
High Park Garage Door ExpertsRequest a visit
Open 24/7(289) 807-2460Call now
Technician standing on a stepladder, reaching up with gloved hands to a white and black garage-door opener fixed to the ceiling. — Don Vale
Answering 24/7 in Don Vale

Garage Doors in Don ValeFor landlordsand property managers.

Call now · open 24/7(289) 807-2460

What's happening right now?

Door stuck open

Safely, right now

  1. Leave it where it stopped. Don't pull it down by hand or keep pressing the button.
  2. Keep the doorway clear of people, pets and vehicles.
  3. Leave the red emergency release alone while the door is up: it can come down hard.
Call (289) 807-2460

Request a visit What the fix involves

Door won't close

Safely, right now

  1. Don't keep hitting the button. Repeated tries can do more damage than the first fault.
  2. Keep clear of the doorway, even to move something out of the way. Tell us on the call if you can see anything in the door's path.
  3. Don't bypass or re-aim the safety sensors by the floor to make it close.
Call (289) 807-2460

Request a visit What the fix involves

Spring snapped

Safely, right now

  1. Don't lift the door by hand and don't use the opener.
  2. Keep people, pets and cars clear of the door.
  3. Don't pull the emergency release while the door is open. It can drop.
Call (289) 807-2460

Request a visit What the fix involves

Car stuck inside

Safely, right now

  1. Don't use the car to force the door. It can collapse.
  2. Don't pull the release or lift the door if it feels heavy or you heard a bang. That usually means a broken spring.
  3. Leave the car inside for now and plan another ride.
Call (289) 807-2460

Request a visit What the fix involves

If you look after rental homes or a row of townhouses in Don Vale, one call covers every door. We keep notes on each address, replace like with like so tenants are not learning a new remote, and send a clear written summary of what was done so your records stay in order.

Request a visit

Same fees day or night · 16 years in business

The fix, explained · Don Vale

What is the door doing?

EmergencyTorsion Spring ReplacementOn a cold morning the remote does nothing useful: the light comes on, the motor turns briefly, the door stays shut.

The fix

Torsion spring replacement is really a service on the whole balance system. The spring sits on a shaft that turns in a centre bearing and two end bearings, drives a pair of cable drums, and lifts the door through two steel cables.

Until then

  1. When a spring breaks, the safe approach for the household is to leave the door where it is, keep people and vehicles clear, and avoid running the opener, which can damage the top section, the trolley or the gear drive.

  2. Pull the manual release only when the door is fully closed unless a technician asks otherwise; a door disconnected while partly open can move on its own if the springs are out of balance.

Call (289) 807-2460Request a visit Torsion Spring Replacement

EmergencyOff-Track Garage Door ResetThe rollers on the door have been squealing for months.

The fix

When one side of a door drops and the sections tilt, the lifting cables are usually involved. Each cable runs from a bottom bracket up to a drum on the torsion shaft, and both must stay taut and wound evenly for the door to rise level.

Until then

  1. Never run the opener on a door that is off its track or hanging crooked; every cycle drives the racked door harder into the rails and can pull the track from the wall or tear a hinge.

  2. Pull the manual release only when the door is fully closed unless a technician asks otherwise; a door disconnected while partly open can move on its own if the springs are out of balance.

Call (289) 807-2460Request a visit Off-Track Garage Door Reset

EmergencyGarage Door Cable ReplacementSomeone left the snow shovel leaning in the opening and the door came down on it.

The fix

Garage door cables carry the weight of the door as tension held by the springs, which is why the work follows a careful, well-rehearsed sequence rather than simply hooking a cable back on. On a torsion system the technician clamps the door, disconnects the opener and unloads the springs with winding bars before any cable, drum…

Until then

  1. Never run the opener on a door that is off its track or hanging crooked; every cycle drives the racked door harder into the rails and can pull the track from the wall or tear a hinge.

  2. Pull the manual release only when the door is fully closed unless a technician asks otherwise; a door disconnected while partly open can move on its own if the springs are out of balance.

Call (289) 807-2460Request a visit Garage Door Cable Replacement

EmergencyExtension Spring ReplacementThe opener groans on the way up and the door slams the last foot on the way down, hard enough to rattle the windows.

The fix

Garage doors are balanced by one of two spring systems, and the extension kind is the one you find on many single-car doors and older detached garages. Instead of a spring wound on a shaft above the opening, an extension system uses two springs stretched along the horizontal tracks, working through pulleys and cables.

Until then

  1. When a spring breaks, the safe approach for the household is to leave the door where it is, keep people and vehicles clear, and avoid running the opener, which can damage the top section, the trolley or the gear drive.

  2. Pull the manual release only when the door is fully closed unless a technician asks otherwise; a door disconnected while partly open can move on its own if the springs are out of balance.

Call (289) 807-2460Request a visit Extension Spring Replacement

Book soonEmergency Release RepairA previous owner knotted the release cord around the rail and stacked storage shelves right beneath it.

The fix

There are two releases on many garages, and this service covers both. Inside, the red handle drops from the trolley and anyone standing in the garage can pull it.

Until then

  1. Pull the release with the door fully closed whenever possible, and keep the opening clear as you do.

  2. Lift a door by its handles or the gripping points on the panel face, never at the joint between sections, which closes as the door bends around the track.

Call (289) 807-2460Request a visit Emergency Release Repair

Book soonGarage Door Opener Diagnosis and RepairThe wall button works every time.

The fix

Winter changes what an opener is asked to do. Grease in the gear case and on the rail thickens in the cold, rollers turn stiffly, and the bottom seal can freeze to the concrete overnight so the door is briefly glued shut.

Until then

  1. Pull the release with the door fully closed whenever possible, and keep the opening clear as you do.

  2. Never drive a vehicle at a closed door to get out; the door collapses and the stored tension in the counterbalance is released.

Call (289) 807-2460Request a visit Garage Door Opener Diagnosis and Repair

Don Vale

Garage door services · Don Vale

For properties in Don Vale we service the door, the hardware that lifts it and the opener that drives it, and we install new doors and openers when the old ones are done. Residential and commercial work are both covered, each with its own parts, tools and approach.

Bigger photo, sooner job: Emergency Book soon Plan ahead

Answering 24/7 in Don Vale

How a visit goes

High Park Garage Door Experts

Job ticket · open 24/7

  1. 1 Call

    Tell us what the door is doing

    Describe the property, the hardware and what has changed, and the visit starts from what you have seen.

    (289) 807-2460 · open 24/7

  2. 2 Questions

    Getting the details

    We ask about the door's age, the type of springs, the opener and what changed. A photo of the hardware helps us bring the right stock.

  3. 3 On the way

    In the van

    Don Vale to Bennington Heights, Cabbagetown, Don Vale, Moore Park, Regent Park, Riverdale, Rosedale, St. James Town and Yorkville.

    • Torsion shaft and coupler
    • Garage-door spring lubricant
    • Socket set and wrenches
    • Stationary cone bolts and nuts
    • Cable drums

  4. 4 Fixed

    Completing the repair

    Testing the balance. With the opener disconnected we raise the door by hand. It should lift with light effort and stay put at waist height; if not, we know where to look.

    Completing the repair. Parts are replaced, settings adjusted and the safety sensors tested. You get a summary of what was done and what to keep an eye on.

Same fees day, night or weekend · on-site assessment preferred

Toronto, Ontario

Don Vale information

Sectional Garage Door Replacement, Off-Track Garage Door Reset, Garage Door Bottom Seal Replacement, Garage Door Manual Lock Repair, Garage Door Safety Inspection, New-Construction Garage Door Installation, Full-View Glass Garage Door Installation, Commercial Rolling Door Repair, Emergency Release Repair and Extension Spring Replacement

Town
Don Vale, Toronto, Ontario
In business
16 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

58%

Older homes. About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.

Extension springs are common on older doors, and they should carry a safety cable through the middle so a broken spring is held rather than flung. Adding those cables is a small job the technician checks for and offers on any older door he services.

23%

Single-detached houses make up about 23% of homes in Toronto (2021 Census).

Townhouse rows generally have a narrow single door on each unit, with shared walls on both sides. Noise from a chain opener or dry rollers carries straight into the neighbour's home, so quiet belt-drive openers and nylon rollers are a popular and considerate choice here.

Source: Statistics Canada, 2021 Census of Population

Nearby

Open Don Vale in Google Maps
Two gray-blue vertical-plank garage doors under a pebble-textured concrete overhang, half in shadow, beside a green shrub and a paved lot. — Don Vale
  • 16years in business
  • 24/7open, every day
  • Same feesday, night or weekend
  • On siteassessment preferred

Have your Don Vale garage door assessed at the house.

What people in Don Vale can expect from us: a technician who arrives when he said he would, looks at the door properly, explains the cause, gives a price on site before starting, does the work carefully with the door secured, tests it through full cycles, and leaves the garage as tidy as he found it.

Toronto, Bennington Heights, Cabbagetown, Moore Park, Regent Park, Riverdale, Rosedale, St. James Town and Yorkville

  • Told before touched. Nothing is adjusted or replaced until you have heard what we found and agreed with the plan for it.

  • Neat work, neat exit. New parts fitted cleanly, old ones removed, the floor and door wiped down. The garage is yours again the moment we leave.

  • Room to choose. We give you the practical picture and step back. Repair now, plan a replacement, or wait and watch: your call.

Tell us what the door is doing: (289) 807-2460

Asked and answered

Advice · (289) 807-2460

Is the inspection a repair visit?

It is a look and a record first. Small maintenance items such as lubrication, cleaning and aligning the photo eyes and tightening fasteners can be done on the spot if you wish. Anything involving spring tension, cables, drums, worn rollers or damaged sections is written up with a clear explanation and quoted as its own job, so you decide with the full picture in front of you.

Will the track have to be replaced?

Often not. A track that is simply out of plumb, spread at the lip or loose on its brackets is re-formed and re-fixed. Replacement is for rail that has been crushed, kinked or torn by an impact, because a roller passing a tight spot will pop out again. The technician measures the damaged length against the door's roller size and tells you which case you have before any track is ordered or cut.

What is the difference between T-style, bead and bulb seals?

The names describe the edge that grips the retainer and the shape of the part that meets the floor. A T-style seal has T-shaped edges that slide into slotted channels along the bottom rail. A bead seal has round edges for the rounder channels found on many older steel doors. A bulb, or U-style, seal is a larger tube that compresses further and suits rough or dished floors. The retainer on your door decides which one fits.

Can a manual lock be added to a door that never had one?

Yes. An inside slide bolt is the simplest addition: it fixes to the door's edge stile and a slot is punched in the track to receive it. A keyed T-handle can also be added, with a cutout in the centre of a section, a centre mechanism and bars run to both tracks. Where an opener is fitted, the new lock is set up so the two are coordinated from day one.

Open 24/7

Request a visit

Have your Don Vale garage door assessed at the house.

Call now · open 24/7(289) 807-2460
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 16 years in business